Simple Pointer Mud Pressure Gauges
Built to pair. Engineered to last.
The WG Industries 6" Simple Point Pressure Gauge is engineered to operate with a 4:1 pressure debooster, allowing crews to safely monitor high-pressure systems on a single, easy-to-read dial. The full-scale layout with 25 PSI subdivisions delivers clear, fast readings in the field, even at a distance.
Heavy-duty black housing, brass top mount, and a calibrated dial built and tested in Houston, Texas.
KEY FEATURES
Designed exclusively for use with a 4:1 pressure debooster
Large 6" dial face for fast, clear readings at a distance
25 PSI subdivisions for precise field measurement
Brass top-mount fitting for direct installation on the debooster
Built, calibrated, and tested in Houston, Texas
APPLICATIONS
Wellhead and frac iron pressure monitoring
Mud pump and standpipe pressure readings
Cementing and stimulation operations
Dual-gauge manifold installations
Direct high-pressure readings. No debooster required.
The WG Industries 6" Simple Pointer Pressure Gauge delivers direct 0 to 10,000 PSI readings without the need for an inline debooster. The large 6" face and 20 PSI subdivisions give field crews clear, accurate pressure data at a glance.
Heavy-duty black housing, brass top mount, and a calibrated dial assembled and tested in Houston, Texas.
KEY FEATURES
Direct-reading 0 to 10,000 PSI scale, no debooster required
Large 6" dial face for clear, at-a-distance readings
20 PSI subdivisions for precise field measurement
Brass top-mount fitting for fast installation
Built, calibrated, and tested in Houston, Texas
APPLICATIONS
Wellhead and pump pressure monitoring
Standpipe and circulating system readings
High-pressure manifold installations
General oilfield pressure measurement up to 10,000 PSI
Single Pointer Pressure Gauge System Features:
3,000 p.s.i., 6,000 p.s.i., 10,000 p.s.i., 15,000 p.s.i.
7,000 kPa, 14,000 kPa, 21,000 kPa, 35,000 kPa, 42,000 kPa, 70,000 kPa
MPa, and BAR capacities
Benefits:
6" dial face for a large and clear reading display
After years of service, this gauge has been proven accurate even in the most extreme of conditions.
360 degree calibration allows you to see all pressure changes, no matter how small.
Adjustable gauge sensitivity to increase reading accuracy in all situations.
Complete customization available for max pressure and dial subdivisions for the most accurate readings.
System can be configured to be used with H2S service.
Can be use for high pressure and low pump pressure operations and choke manifold pressure control operations.
To Order, Specify:
Application
Required capacity
Gauge mounting designs
English or Metric divisions
Hose length
Multi-Gauge System
The WG Industries Multi-Gauge System combines a full-scale analog dial with a digital display, giving operators a quick at-a-glance reading and a precise numerical value on the same instrument. Inner PSI scale, outer MPa scale, and a backlit digital readout deliver clear data in any field condition.
Front-panel buttons (CE/C, ENT, up, down) allow on-instrument configuration without external tools. Heavy-duty housing built and tested in Houston, Texas.
KEY FEATURES
Combined analog dial and digital readout on a single instrument
Inner PSI scale and outer MPa scale for dual-unit measurement
Backlit digital display for readings in low-light conditions
Front-panel controls (CE/C, ENT, up, down) for on-instrument setup
Heavy-duty housing built for harsh field environments
Built and tested in Houston, Texas
APPLICATIONS
High-pressure systems requiring dual-unit verification
Calibration and reference measurement
Manifold and skid installations with mixed-unit specifications
Test stand and quality control applications
The WG Industries Multi-Gauge System combines a full-scale analog dial with a digital display, giving operators a quick at-a-glance reading and a precise numerical value on the same instrument. Inner PSI scale, outer MPa scale, and a backlit digital readout deliver clear data in any field condition.
Front-panel buttons (CE/C, ENT, up, down) allow on-instrument configuration without external tools. Heavy-duty housing built and tested in Houston, Texas.
KEY FEATURES
Combined analog dial and digital readout on a single instrument
Inner PSI scale and outer MPa scale for dual-unit measurement
Backlit digital display for readings in low-light conditions
Front-panel controls (CE/C, ENT, up, down) for on-instrument setup
Heavy-duty housing built for harsh field environments
Built and tested in Houston, Texas
Tong Torque and Tong Line System
The WG Industries Tong Torque and Tong Line Pull System provides clear, calibrated readings of tong line pull during make-up and break-out of tubulars on the rig floor. The dial reads in 200 lb increments across the full range, with a built-in torque conversion based on the tong handle length (torque = line pull × tong length in feet).
Heavy-duty black housing, brass top mount, and a calibrated dial assembled and tested in Houston, Texas.
KEY FEATURES
Direct line pull readings in 200 lb increments
Built-in torque conversion (torque = line pull × tong length in feet)
High-visibility yellow scale ring for fast field reading
Brass top-mount fitting for fast installation
Heavy-duty black housing built for the rig floor
Calibrated and tested in Houston, Texas
APPLICATIONS
Tubular make-up and break-out operations
Drilling, completion, and workover rig floors
Tong torque verification and quality control
Connection torque monitoring
The WG Industries Tong Torque Gauge delivers direct foot-pound readings calibrated specifically for use with a 36-inch tong handle. The full-scale dial covers 0 to 45,000 ft-lbs with a high-visibility yellow scale ring, giving floor hands a fast, clear reference during make-up and break-out operations.
Heavy-duty black housing, brass top mount, and a calibrated dial assembled and tested in Houston, Texas.
KEY FEATURES
Direct foot-pound readings calibrated for a 36" tong handle
Full scale 0 to 45,000 ft-lbs
High-visibility yellow scale ring for fast field reading
Brass top-mount fitting for fast installation
Heavy-duty black housing built for the rig floor
Calibrated and tested in Houston, Texas
APPLICATIONS
Tubular make-up and break-out torque monitoring
Drilling, completion, and workover operations
Connection torque verification
Tong calibration and quality control
The WG Industries Tong Torque Gauge delivers direct foot-pound readings calibrated specifically for use with a 36-inch tong handle. The full-scale dial covers 0 to 45,000 ft-lbs with a high-visibility yellow scale ring, giving floor hands a fast, clear reference during make-up and break-out operations.
Heavy-duty black housing, brass top mount, and a calibrated dial assembled and tested in Houston, Texas.
KEY FEATURES
Direct foot-pound readings calibrated for a 36" tong handle
Full scale 0 to 45,000 ft-lbs
High-visibility yellow scale ring for fast field reading
Brass top-mount fitting for fast installation
Heavy-duty black housing built for the rig floor
Calibrated and tested in Houston, Texas
APPLICATIONS
Tubular make-up and break-out torque monitoring
Drilling, completion, and workover operations
Connection torque verification
Tong calibration and quality control
Pump Stroke Counters
The WG Industries Single Pump Stroke Counter with SPM/BPM gives drillers and operators real-time visibility into both stroke count and pump rate on a single compact panel. The dual digital displays show total strokes or barrels on top and the live SPM or BPM rate below, with simple front-panel controls for zero, up, and down adjustments.
Stainless steel housing built and tested in Houston, Texas.
KEY FEATURES
Dual digital display for total strokes/barrels and live SPM/BPM rate
Front-panel controls: Zero/Down and SPM/BPM/Up
Stainless steel housing for harsh field environments
Compact footprint for tight panel mounting
Built and tested in Houston, Texas
APPLICATIONS
Single-pump drilling and workover operations
Cementing and stimulation pump tracking
Mud pump stroke and rate monitoring
Single-pump field installations
The WG Industries Dual Pump Stroke Counter gives drillers and operators independent visibility into two pumps on a single panel. Four digital displays show live strokes per minute and total strokes for each pump, with dedicated Reset buttons for each pump and a central Power control.
Stainless steel housing built and tested in Houston, Texas.
KEY FEATURES
Four-display layout: strokes/minute and total strokes for each of two pumps
Independent Reset buttons for each pump
Central Power control
Stainless steel housing for harsh field environments
Built and tested in Houston, Texas
APPLICATIONS
Two-pump drilling and workover rigs
Cementing and stimulation operations
Dual-pump mud and circulating systems
Multi-pump field installations
The WG Industries Single Pump Stroke Counter delivers clean, accurate stroke tracking on a single compact panel. The top display shows live strokes, the bottom display shows cumulative total strokes, and simple Power and Reset buttons make setup and operation straightforward in the field.
Stainless steel housing built and tested in Houston, Texas.
KEY FEATURES
Dual digital display for live strokes and total strokes
Front-panel Power and Reset controls
Stainless steel housing for harsh field environments
Compact footprint for tight panel mounting
Built and tested in Houston, Texas
APPLICATIONS
Single-pump drilling and workover operations
Cementing and stimulation pump tracking
Mud pump stroke monitoring
Single-pump field installations
The WG Industries Triple Pump Stroke Counter delivers full visibility across three independent pumps on a single panel. Six digital displays show total strokes and live rate for each pump, with dedicated reset buttons (P1, P2, P3) and a master On/Off control for fast, clean operation in the field.
Stainless steel housing built and tested in Houston, Texas.
KEY FEATURES
Six-display layout: total strokes and rate for each of three pumps
Dedicated Reset buttons for each pump (P1, P2, P3)
Master On/Off control
Stainless steel housing for harsh field environments
Built and tested in Houston, Texas
APPLICATIONS
Three-pump drilling and workover rigs
Cementing and stimulation operations
Triple-pump mud and circulating systems
High-output multi-pump installations
Pump Stroke Counters Features:
Our pump stroke counter systems are expertly designed to accurately measure the stroke rate and count of mud pumps. The system is user-friendly and dependable, capable of measuring up to three mud pumps simultaneously. It's worth noting that our systems are manufactured here in the United States, further reinforcing our commitment to quality and reliability.
Features:
Rugged design to ensure years of trouble-
free service
• LCD or VFD displays available for all
weather conditions
• Traditional limit switch or proximity
switches available
• Can be programmed in the field with the
aid of a laptop
• Power or battery-operated models available
• No display limits
Benefits:
Low maintenance and operating costs
Can be custom built to meet
various requirements
• Various models in stock for quick delivery
• Over-moulded connectors for low maintenance
• Battery life of up to two years (battery-operated models only)
Compression Load Cells
Compact compression measurement, built for the rig.
The WG Industries Compression Load Cell uses a proven pad-style hydraulic design in a compact, low-profile housing. The center top port accepts a load pin or transfer fitting, and two side hydraulic ports allow connection to a gauge or transducer for direct readout. Machined steel construction built and tested in Houston, Texas.
Compact compression measurement, built for the rig.
The WG Industries Compression Load Cell uses a proven pad-style hydraulic design in a compact, low-profile housing. The center top port accepts a load pin or transfer fitting, and two side hydraulic ports allow connection to a gauge or transducer for direct readout. Machined steel construction built and tested in Houston, Texas.
Compact compression measurement, built for the rig.
The WG Industries Compression Load Cell uses a proven pad-style hydraulic design in a compact, low-profile housing. The center top port accepts a load pin or transfer fitting, and two side hydraulic ports allow connection to a gauge or transducer for direct readout. Machined steel construction built and tested in Houston, Texas.
Compact compression measurement, built for the rig.
The WG Industries Compression Load Cell uses a proven pad-style hydraulic design in a compact, low-profile housing. The center top port accepts a load pin or transfer fitting, and two side hydraulic ports allow connection to a gauge or transducer for direct readout. Machined steel construction built and tested in Houston, Texas.
The WG Industries Heavy-Duty Hydraulic Compression Load Cell delivers accurate compression load readings under the highest-capacity rig conditions. The pad-style design seats directly under the load, transferring force to an internal hydraulic chamber that drives a connected pressure gauge or transducer.
Top-side mounting holes allow secure installation under heavy structural loads, and dual hydraulic ports provide flexible gauge or sensor hookup. Built and tested in Houston, Texas.
KEY FEATURES
Heavy-duty pad-style design for high-capacity compression measurement
Top-side mounting holes for secure installation under load
Dual hydraulic ports for flexible gauge or transducer connection
Machined steel construction for durability under heavy rig loads
Built and tested in Houston, Texas
APPLICATIONS
Deadline anchor load measurement
Hookload monitoring on heavy-duty rigs
Drawworks compression load tracking
Structural load verification
1-Pump Cable Assembly
The WG Industries 1-Pump Cable Assembly delivers everything needed to wire a single pump into a stroke counter system. Each kit ships with a proximity sensor switch, mounting bracket for installation on the pump frame, and pre-terminated cabling cut to field length. Built to pair directly with WG Industries single-pump stroke counters. Assembled and tested in Houston, Texas.
The WG Industries 1-Pump Cable Assembly delivers everything needed to wire a single pump into a stroke counter system. Each kit ships with a proximity sensor switch, mounting bracket for installation on the pump frame, and pre-terminated cabling cut to field length. Built to pair directly with WG Industries single-pump stroke counters. Assembled and tested in Houston, Texas.